Selection of installation sites for air compressors

1. When the air compressor is installed, it must be a wide place with good lighting to facilitate operation and maintenance.
2. The relative humidity of the air should be low, less dust, clean and well-ventilated, away from flammable and explosive, corrosive chemicals and harmful unsafe items, avoid close to the place where dust is emitted.
3. When the air compressor is installed, the ambient temperature in the installation site should be higher than 5 degrees in winter and lower than 40 degrees in summer, because the higher the ambient temperature, the higher the discharge temperature of the air compressor, which will affect the performance of the compressor, if necessary, the installation site should be set up ventilation or cooling device.
4. If the factory environment is poor and there is a lot of dust, pre-filter equipment must be installed [3].
5. The air compressor unit in the air compressor installation site should be arranged in a single row.
6. Reserve the passage, and those who meet the conditions can install a crane to facilitate the maintenance of air compressor equipment.
7. Reserve maintenance space, and there must be at least 70 cm between the air compressor and the wall.
8. The distance between the air compressor and the top space is at least one meter.