Starting Steps Of Screw Air Compressor

1. Close the switch handle.
2. Jogging, check whether the motor steering is correct, except for those with commutation protection devices.
3. Confirm that the manual valve is in the "unloading" state, press the "start" button to officially operate, after a few seconds, dial the manual valve to the "loading" position, the pressure gradually rises to the rated pressure, and the lubricating oil is lower than the exhaust pressure of about 0.25Mpa.
4. Observe whether the operation is stable, whether the sound is normal, whether the air convection is smooth, whether the instrument reading is normal, and whether there is leakage.