The Working Process Of The Screw Compressor

Twin screw host introduction, working process: the volume of the primitive element between the teeth (that is, the working volume formed by each pair of teeth) gradually expands with the rotation of the rotor, and is connected with the air intake orifice at the bottom left of the machine, and the gas enters the primitive volume through the orifice, and the air intake process begins; After the rotor rotates to a certain angle, the volume of the interdental primitive element exceeds the position of the air intake orifice, and it is disconnected from the air intake orifice, and the air intake process ends; After the rotor turns to a certain angle, the volume of the two isolated interdental primitives begins to shrink at the same time due to the convex teeth of the male screw invading the concave teeth of the female screw, realizing the compression process of gas. until the moment when a pair of primitive volumes are connected to the exhaust orifice; After the primitive volume and the exhaust orifice are connected, the exhaust process begins, and the exhaust process continues until the two teeth are fully meshed, that is, the two primitive volumes are equal to zero due to the complete meshing of the two rotors.