Best Air Compressor for Laser Cutting Permanent Magnet Frequency Conversion Energy Saving
Gas tank
400L large-capacity design, good buffering effect, energy-saving and power-saving, dual-body design, dual-stage filtration. Reduces the burden on the back-end cold dryer, lowers the center of gravity, facilitates transportation, and is stable. Casters are optional for easy movement.
Filter
Protects the laser cutting machine lens and cutter head. The front black oil mist filter has good water and oil removal effect. The filtration accuracy of over-positioned oil and water removal can reach 0.01PPM.
Freeze dryer
Pressure dew point 2-10°C, high-pressure design for water removal effect, YUKA filtration, automatic and manual dual sewage discharge design to remove residual substances. Enlarge the heat dissipation mesh.
Energy-saving permanent magnet inverter
The vector calculation method control is more traditional, frequency conversion saves energy, and the starting current is small.
Filter
Grade water and oil removal filter electronic drain valve, automatic forced drainage, good water and oil removal effect.
Excellent air filter
The filter element filters out tiny fixed particles in the air to ensure the normal operation and service life of the equipment.
Oil filter
The best air compressor for laser cutting uses a spin-on oil filter filtered with fine materials to protect the normal use of the host.
Designed for high temperature resistance, a temperature control valve group is installed, and the internal lubricant is fully synthetic lubricant to separate the moisture inside the host and extend the life of the host.
The best air compressor for laser cutting uses an integrated air filter, filter element, low resistance, and sufficient flow.
The chassis adopts a revolving door, unique design, easy maintenance, partition filter type, air inlet, noise reduction, and dust removal.
The side exhaust design is aimed at the current laser industry, where there is a lot of dust and the radiator is easily blocked. The radiator is on the side, making it less likely to accumulate dust.
|
Best Air Compressor Parameters for Laser Cutting |
||||
|
Model |
SPF22-16QL |
SPF22-16QL |
SPF37-16QL |
SPF45-16QL |
|
Pressure |
16Bar |
16Bar |
16Bar |
16Bar |
|
Displacement |
2.2m³/min |
2.2m³/min |
3.9m³/min |
5.0m³/min |
|
Shaft power |
23.3KW |
23.3KW |
40.2KW |
49.3KW |
|
Motor speed |
3600 |
3600 |
2000 |
2500 |
|
Size |
2250*850*1870 |
1490*950*1400 |
1490*950*1400 |
1490*950*1400 |
|
Remark |
Integrated tank |
Standalone |
Standalone |
Standalone |
|
Quote |
34000 |
27140 |
37650 |
41250 |
An introduction to the best air compressor accessories for laser cutting
The screw host is like the heart of the screw compressor. Its performance directly affects the energy efficiency and service life of the whole machine. Liutek uses the air compressor host.
SAP profile line optimizes screw compression efficiency to the greatest extent and saves more than 5% energy than similar products on the market. D. High machining accuracy, small host vibration and low noise. SKF heavy-duty bearings and high-rigidity rotors ensure long and reliable operation. Series compressors receive reliable quality assurance.
LCD display in Chinese and English has a friendly and intuitive interface, allowing the unit parameters to be adjusted quickly and conveniently. D Powerful all-round protection function: prevent faults caused by short circuit, increased rotation, phase loss, overload, etc. to the greatest extent.
Various signal outputs: switch analog/RS 485 port, optional large-screen touch master controller.
Modular design
Models with power <37kW adopt innovative modular design, integrating high-efficiency main engine valve group, main pipeline and oil and gas separation system, with no leakage, low pressure loss, and easier maintenance. Pioneering technology creates high efficiency and reliability of the unit.
Vector control technology separates the two vectors of excitation and torque contained in the stator current, controls them separately, and then merges and converts them into control signals of frequency conversion parameters to achieve effective control of electromagnetic torque.
Efficient design and SKF bearings ensure a long life of the motor.
IP54 protected fully enclosed motor allows worry-free operation under harsh working conditions. D comes standard with phase sequence protection to prevent reversal.
Extremely lower noise, enabling remote monitoring.
The noise of the whole machine is only 63-75dB(A), so you won’t feel uncomfortable even if it is placed near the office.
Keep abreast of machine status via wireless network connection.
Hot Tags: air compressor for laser cutting machine, China air compressor for laser cutting machine manufacturers, suppliers, factory, Air Compressor for Laser Cutter, Laser Cutter Compressor, Laser Cutter Air Compressor, Air Compressor for Laser Cutting Machine, Laser Cutting Air Compressor
