Air compressor for laser cutting machine has compact structure and low noise
Modular structure design, durable components, high energy efficiency and reliable direct transmission, fully enclosed protective shell, compact structure and low vibration.
The air compressor for laser cutting machines adopts an ergonomic design, which is lower noise and easier to maintain and maintain. The machine can be run directly when attached to the piping system and power supply.
Special compressor for light cutting has reliable performance
The compressor main engine uses imported high-precision bearings and a 5:6 spiral rotor to ensure a uniform meshing gap and higher gas production efficiency.
The internal pipes are sealed by ferrules or O-rings to prevent leakage.
The compressor automatically adjusts its operation according to the set pressure, and the large-area cooler can obtain lower exhaust temperature and better cooling temperature.
The air compressor for laser cutting machines uses hydromagnetic materials that can withstand high temperatures of 180 degrees Celsius, which effectively ensures that the hydromagnetic unit will never demagnetize. It has a fully enclosed structure with a protection level of IP65, low specific power, super first-class energy efficiency, and comes with its own gas tank.
Constant voltage
The air outlet reaches a constant pressure state, realizing energy saving in the true sense.
High-precision triple filtration device
The oil removal accuracy of the filter is less than 0.01ppm, it can filter out solid particles as small as 0.01 microns, and provide high-quality compressed air.
Energy-saving cold dryer
The high heat exchange efficiency design with 5"C inlet and outlet temperature difference reduces the demand for cooling capacity to a very low level and achieves a high energy efficiency ratio. The stainless steel heat exchanger is used to prevent the dryer itself from becoming a source of pollution and achieve high-quality compressed air.
The high-efficiency heat exchange capacity and the use of environmentally friendly refrigerant R134a make it particularly suitable for high temperature and high humidity environments. The 99.9% energy-efficient air-water separation structure and highly reliable automatic drainage device ensure that condensed water is discharged from the compressed air system in a timely manner.
Super quiet
Sound refrigeration compressor, high reliability and long service life.
The air condenser adopts reinforced heat transfer fins with nano-anti-corrosion coating to prevent the condensation efficiency from decreasing due to aging.
|
Laser cutting compressor parameter table |
||||
|
Model |
SPF22-16QL |
SPF22-16QL |
SPF37-16QL |
SPF45-16QL |
|
Pressure |
16Bar |
16Bar |
16Bar |
16Bar |
|
Displacement |
2.2m³/min |
2.2m³/min |
3.9m³/min |
5.0m³/min |
|
Shaft power |
23.3KW |
23.3KW |
40.2KW |
49.3KW |
|
Motor speed |
3600 |
3600 |
2000 |
2500 |
|
Size |
2250*850*1870 |
1490*950*1400 |
1490*950*1400 |
1490*950*1400 |
|
Remark |
Integrated tank |
Standalone |
Standalone |
Standalone |
|
Quote |
34000 |
27140 |
37650 |
41250 |
Introduction to air compressor accessories for laser cutting machines
The screw host is like the heart of the screw compressor. Its performance directly affects the energy efficiency and service life of the whole machine. Liutek uses the air compressor host.
SAP profile line optimizes screw compression efficiency to the greatest extent and saves more than 5% energy than similar products on the market. D. High machining accuracy, small host vibration and low noise. SKF heavy-duty bearings and high-rigidity rotors ensure long and reliable operation. Series compressors receive reliable quality assurance.
LCD display in Chinese and English has a friendly and intuitive interface, allowing the unit parameters to be adjusted quickly and conveniently. D Powerful all-round protection function: prevent faults caused by short circuit, increased rotation, phase loss, overload, etc. to the greatest extent.
Various signal outputs: switch analog/RS 485 port, optional large-screen touch master controller.
Modular design
Models with power <37kW adopt innovative modular design, integrating high-efficiency main engine valve group, main pipeline and oil and gas separation system, with no leakage, low pressure loss, and easier maintenance. Pioneering technology creates high efficiency and reliability of the unit.
Vector control technology separates the two vectors of excitation and torque contained in the stator current, controls them separately, and then merges and converts them into control signals of frequency conversion parameters to achieve effective control of electromagnetic torque.
Efficient design and SKF bearings ensure a long life of the motor.
IP54 protected fully enclosed motor allows worry-free operation under harsh working conditions. D comes standard with phase sequence protection to prevent reversal.
Extremely lower noise, enabling remote monitoring.
The noise of the whole machine is only 63-75dB(A), so you won’t feel uncomfortable even if it is placed near the office.
Keep abreast of machine status via wireless network connection.
Hot Tags: laser cutter compressor, China laser cutter compressor manufacturers, suppliers, factory, Laser Cutter Compressor, Laser Cutting Air Compressor, Laser Cutter Air Compressor, Air Compressor for Laser Cutter, Air Compressor for Laser Cutting Machine
